39
General Information
Each display provides the following
information:
Odometer
Shows the total distance that the motorcycle
has travelled.
Average Speed
The average speed is calculated from when
the trip computer was last reset. After being
reset the display will show dashes until
1 mile/km has been covered.
Instantaneous Fuel Consumption
An indication of the fuel consumption at an
instant in time.
Average Fuel Consumption
An indication of the average fuel
consumption. After being reset the display
will show dashes until 0.1 miles/km has been
covered.
Journey Time
The total time elapsed since the trip meter
was last set to zero. The counter will
increment while the engine is running.
Range to Empty
This is an indication of the probable distance
that can be travelled on the remaining fuel in
the tank.
Journey Distance
The total journey distance travelled since the
trip meter was last set to zero.
Fuel Used
The fuel used is calculated from the time
when the trip computer was last reset.
To Next Page
Loading...
