Speedy 360
BA 8032_2.2_EN (05/2016) 42 / 90
5.2 Tables (multifunctional table concept)
5.2.1 Multifunctional base frame
The multifunctional base frame is bolted to the
mounting frame, which is attached to the Z axis.
All table variants rest on the base frame. With the exception of the ferromagnetic
engraving table which may also be placed directly on the mounting frame if there is no
base frame present.
5.2.2 Ferromagnetic engraving table (standard)
The ferromagnetic construction allows mounting
thin materials such as paper, films or foils with
magnets to ensure an even and flat surface. An
even working area is essential for achieving
optimal results for laser engraving and marking
applications.
The vacuum table fixates various materials to the
working table using vacuum. This ensures correct
focusing over the entire surface, leading to better
engraving results. In addition, it reduces the
handling effort associated with mechanical
mounting.
The vacuum table is the ideal table for thin and
lightweight materials, such as paper, foils and
films, that generally do not rest flatly on the
surface.
To Next Page
Loading...
Need help?
General
