2.1.3 Safety norms and regulations
The following directives and guidelines must be observed to avoid hazards when operating Trotec
laser systems:
EN 60825-1 Safety of Laser Products - Part 1: Equipment Classification and Requirements
EN 60950 Information Technology Equipment – Safety
EN 61010-1 Safety Requirements for Electrical Equipment for Measurement, Control and
Laboratory Use; General Requirements
BGV B2 (VBG93) Laser Radiation
UL 60950 Standard for Safety for Information Technology Equipment
UL 31011-1 Electrical Equipment for Laboratory Use – Part 1: General
21 CFR 1040.10 Performance Standard for Light-Emitting Products – Specific Laser Products
21 CFR 1040.11 Performance Standard for Light-Emitting Products – Specific-Purpose Laser
Products
The general guidelines and directives listed within this manual may differ according to
locality, region or country.
Therefore, always observe the directives as well as the regulations of the institutions for
statutory accident insurance association applicable to you.
The operator is responsible for fulfilling all safety requirements, as Trotec Laser GmbH
has no influence on the proper use of the machine.
To Next Page
Loading...
