Trotec Speedy 360 flexx - Personnel Responsibilities; Operating Personnel Responsibilities; Operating and Service Personnel Requirements

Speedy 360
BA 8032_2.2_EN (05/2016) 19 / 90
www.troteclaser.com
2.7 Safety devices
WARNING
Danger from laser beam
Safety and protection devices that are not installed or are not fully functional can lead to
bodily injury and material damage.
 Do not remove, modify or deactivate the safety interlock switches or protective covers
on the machine. Safety and protection devices must be fully functional at all times.
 In case of assumed or presumed damage of safety devices, disconnect the machine
from the mains.
 Damaged safety and protection devices need to be replaced by a Trotec technician
immediately.
The machine is equipped with the following safety devices:
No.
Description
No.
Description
1
Main switch
5
Interlock safety switch
2
Option: Emergency stop button (only with
temperature sensor option)
6
Side panel right (with interlock safety
switch)
3
Option: Temperature sensor reset button
(only with temperature sensor option)
7
Side panel left (with interlock safety
switch)
4
Key switch
8
Acrylic top lid
5
1
4
2
5
5
6
7
8
3