Trotec Speedy 360 flexx Operation Manual

Speedy 360
BA 8032_2.2_EN (05/2016) 35 / 90
www.troteclaser.com
Miscellaneous
Wood
√
√
√
√
Mirror
√
√
√
√
Stone
√
√
Paper (white)
√
√
√
√
√
√
Paper (colored)
√
√
√
√
√
√
√
Food
√
√
√
√
√
√
√
Leather
√
√
√
√
√
√
Fabric
√
√
√
√
Glass
√
√
Ceramics
√
√
√
√
√
Cork
√
√
√
√
√
√
DANGER
Prohibited materials:
Carbon, polyvinyl chloride (PVC), polyvinyl butyral (PVB), polytetrafluorethylene (PTFE,
Teflon
®
), carbon fiber, beryllium oxide and materials containing halogens (fluorine,
chlorine, bromine, iodine and astatine), epoxy-based or phenolic resins
Take care when processing the following materials:
Manganese, chromium, nickel, cobalt, copper and lead. Any material with the naming
addition “flame-retarding” since it might contain bromine.
WARNING
Serious injury or material damage.
The use of prohibited or unreleased materials can cause serious injury or material
damage and will not be covered under warranty.
- Only use approved and released materials.
We recommend performing a material processing test with the above mentioned
material, using the appropriate configuration.
Trotec assumes no responsibility for any consequences of laser processing in any
application, especially with medical or pharmaceutical applications.

Trotec Speedy 360 flexx Specifications

General

Brand	Trotec
Model	Speedy 360 flexx
Category	Printer
Language	English