Speedy 360
BA 8032_2.2_EN (05/2016) 44 / 90
5.2.4.3 Aluminum cutting grid table
This robust cutting table offers excellent stability
and is particularly suitable for cutting tasks with
parts smaller than 100 mm, as these remain in
a flat position after the cutting.
5.2.4.4 Acrylic cutting grid table
The special acrylic grid prevents reflection during
cutting. It is therefore ideal for cutting acrylics,
laminates or plastic films with parts smaller than
100 mm, as these remain in a flat position after
the cutting.
5.2.5 Additional tabletops
5.2.5.1 Honeycomb cutting tabletop
The honeycomb table top is especially suitable
for applications that require minimal reflection
and optimum flatness of the material, e.g. cutting
of membrane keyboards.
The honeycomb tabletop is an additional option
for the vacuum and ferromagnetic engraving
tables.
Available in following sizes:
0.5 inch nominal comb size
0.25 inch nominal comb size
To Next Page
Loading...
Need help?
General
