Trotec Speedy 360 flexx - Cutting Tables

Speedy 360
BA 8032_2.2_EN (05/2016) 43 / 90
www.troteclaser.com
5.2.4 Cutting tables
5.2.4.1 Aluminum slat cutting table
The cutting table with aluminum slats is ideal for
cutting thicker materials (8 mm thickness and
above) and for parts wider than 100 mm.
The slats can be arranged individually,
consequently the table can be adjusted to each
individual application.
5.2.4.2 Acrylic slat cutting table
The cutting table with acrylic slats prevents
reflection during cutting. This table is used in
particular for cutting thicker materials (8 mm
thickness and above) and for parts wider than 100
mm.
The slats can be arranged individually,
consequently the table can be adjusted to each
individual application.