Improper operation may lead to severe physical injury or property damage. For this
reason, work may be carried out only by authorized, trained personnel who are familiar
with how to operate the machine and in strict observance of all safety instructions.
8.1 Before operation
Before commissioning, the following points need to be checked:
Check the machine to ensure that it is in technically flawless condition and complete.
Keep work area orderly and clean. Source of accidents!
Ensure that the optical components are free from dust and dirt.
Activate the extraction system.
Ensure that the electrical installation is complete and the input voltage is correct.
Check the environmental conditions using the technical specification.
Familiarize yourself with the laser safety regulations.
Fulfil all laser safety requirements.
The system may be switched on only when all provisions for complying with laser safety have
been checked by an authorized person and confirmed to have met the standards.
8.2 Software
For information on how to use the software, please read the accompanying software manual.
To Next Page
Loading...
Need help?
General
