Speedy 360
BA 8032_2.2_EN (05/2016) 68 / 90
8.8 Rotary engraving attachment (option)
The rotary engraving attachment is used to engrave cylindrical workpieces. Upon selection of the
option “Rotary Engraving Attachment” in the JobControl
®
software and entering the diameter of the
object to be engraved, the image size will automatically be automatically adjusted to the diameter of
the workpiece to be processed.
Damage to electronics
Inserting or removing the rotary attachment while the machine is turned on may
irreparably damage the electronics.
- Switch off the machine before inserting or removing the rotary attachment.
Rotary attachment with cones:
Engraving of cylindrical objects with
a diameter of up to 270 mm,
a length of up to 760 mm
and a maximum weight of 3 kg.
Rotary attachment with rolls:
Engraving of cylindrical objects with
a diameter of up to 180 mm,
a length of up to 960 mm
and a maximum weight of 10 kg.
Rotary attachment with cones
Rotary attachment with rolls
To Next Page
Loading...
Need help?
General
