Trotec Speedy 360 flexx Operation Manual

Speedy 360
BA 8032_2.2_EN (05/2016) 53 / 90
www.troteclaser.com
7.2 Operating environment
Installation side requirements:
 Operating conditions:
Operating temperature:
+15 °C to 25 °C (59 °F to 77 °F)
Air humidity:
40% – 70% (non-condensing)
 Provide sufficient illumination at the workplace.
 Ensure a dust-free environment (II° according to IEC60947-1)
 Uniform, level, horizontal and firm floor, planarity ±5 mm (±0.1969 inch), no special foundation
required.
 Load-bearing capacity of base frame at least 300 kg/m2 (62 lbs./sq.ft.).
 Freedom of interfering electrical installations, hoses and pipe lines
 Power supply free of fluctuations
 Shielding from EMC

Trotec Speedy 360 flexx Specifications

General

Brand	Trotec
Model	Speedy 360 flexx
Category	Printer
Language	English