Tyco Galaxy SC Controller User Manual

Tyco Electronics Galaxy SC Controller J85501F-1
7 - 9 Feature Descriptions Issue 13 February 2001
capacity Maximum capacity of battery section in
Ampere Hours. This is based on the
number of strings in the section and the
name-plate capacity of the battery type
selected. This calculated item is for
information purposes only.
reserve time Remaining battery reserve time for the
battery section. (See Universal Reserve
Time Prediction Algorithm).
current Discharge current for the battery
section. The section current is used with
the following features: recharge current
limit, low voltage load disconnect
battery section reserve time prediction,
and plant load calculations, when using
only battery shunts for the plant.
voltage A built-in link point for the battery
section voltage. If no monitoring point
is linked to the section voltage, then the
plant voltage is used for the battery
section reserve time prediction
algorithm. (See Universal Reserve
Time prediction algorithm).
mid-point voltage A built-in link point for the battery
section mid-point voltage. A
monitoring point may be linked to this
item. This item is for information
purposes only.
pilot cell voltage A built-in link point for the battery
section pilot cell voltage. A monitoring
point may be linked to this item. This
item is for information purposes only.
charge current A built-in link point for the battery
section charge current. If two shunt
module channels are used to monitor
battery section current (one channel for
charge current, and one channel for
discharge current), then the charge
current channel should be linked to this
point. Using bipolar shunt modules

Tyco Galaxy SC Controller Specifications

General

Brand	Tyco
Model	Galaxy SC Controller
Category	Controller
Language	English