Tyco Galaxy SC Controller User Manual

Tyco Electronics Galaxy SC Controller J85501F-1
Issue 13 February 2001 Feature Descriptions 7 - 26
Rectifier State
History
The rectifier state history maintains a record of the date and time of
every rectifier state change. An entry is added to the history when any
of the rectifiers change state. The latest 256 state entries are retained.
The history report includes the following information:
identifier A mnemonic that uniquely identifies the alarm
date Date entry was made
time Time entry was made
status New status (ON, OFF, STANDBY, VACANT)
description A short description of the rectifier
If status is OFF or STANDBY a cause may be included in parenthesis
after status.
Battery Discharge
History
The battery discharge history maintains a record of the date, time, and
duration of battery discharges. An entry is added to the history at the end
of each discharge cycle. The latest 16 discharge cycles are retained. The
history report includes the following information:
date Date discharge started
time Time discharge started
load Average load during discharge
duration Duration of the discharge in hours and minutes
reserve_time Remaining reserve time at end of discharge in
hours and minutes (optional)
Boost State History The boost state history maintains a record of the date, time, and duration
of the plant boost state. An entry is added to the history at the end of each
boost cycle. The latest 16 boost cycles are retained. The history report
includes the following information:
date Date boost started
time Time boost started
start_mode The mode that initiated the boost:
EXTERNAL External timer
BTP Battery thermal protection
MANUAL Front panel
TIMED MANUAL Timed boost started from
an access port
TIMED AUTO Automatic post battery
discharge time based
end_mode The condition that caused boost to terminate:
EXTERNAL External timer

Tyco Galaxy SC Controller Specifications

General

Brand	Tyco
Model	Galaxy SC Controller
Category	Controller
Language	English