Tyco Galaxy SC Controller User Manual

Tyco Electronics Galaxy SC Controller J85501F-1
Issue 13 February 2001 Feature Descriptions 7 - 46
security level from the T1.317 interface. When changing passwords, the
following guidelines must be followed:
• Passwords must be between 6 and 15 characters long
• User and TL1 passwords may contain alpha-numeric characters
• Super-user and administrator passwords may contain any ASCII
character from value 32 to 126
• Passwords may not be enclosed in double quotes
• The same password may not be used for different T1.317 interface
security levels
• Passwords are not case sensitive (i.e. LINEAGE is the same as
lineage)
The administrator password can be reset to the default setting by
pressing the password reset button located on the front of the intelligent
controller.
Access Port
Security Hardware/
Software Switches
The Galaxy SC provides switches for each access port that can be used
to allow full access to the system or limit access to the user security
level. The hardware switches are located on the intelligent controller
switch bank SW203. These switches can be set to the 0 (disable) or 1
(enable) position. There is a matching software switch for each access
port. These software switches may also be set to 0 (disable) or 1
(enable). The table below describes the hardware and software switch
settings and the resulting level of access. When viewing software
switches from the front panel or T1.317 interface, the reason for limited
access will be displayed in parenthesis as either HW for hardware
switch, SW for software switch, or both.
Hardware Switch Software Switch Level Of Access
0 0 limited access (HW,SW)
0 1 limited access (HW)
1 0 limited access (SW)
1 1 full access
If an access port’s security switch is changed from full to limited access
while someone is logged into that port, their security level will be
dropped to the user level as soon as they access a function that requires
super-user or administrator security privileges.
Call-Back Security The call back security feature allows the Galaxy SC to be configured for
remote access from up to 5 phone numbers. Once these numbers are
configured and call-back security is enabled, access via the modem port
will be answered by a prompt for one of these 5 locations. After the

Tyco Galaxy SC Controller Specifications

General

Brand	Tyco
Model	Galaxy SC Controller
Category	Controller
Language	English