Tyco Galaxy SC Controller User Manual

Tyco Electronics Galaxy SC Controller J85501F-1
2 - 8 Product Description Issue 13 February 2001
well as in many other controller features. There may be plant
configurations, especially those in a distributed power architecture, that
do not contain a single main battery or load shunt. In these cases, remote
peripheral shunt modules are typically used to measure the many
different battery string shunts. No wires will be attached to the “Shunt”
connection on TB1, and no voltage will be present at the Plant Current
test jacks.
Pushbutton Keys A group of keys beneath a large, backlit LCD display is the primary way
the user interacts with the Galaxy SC. These keys are used singly or in
combination to navigate through Galaxy SC’s menus. The following is
the general description of all the keys.
• Up arrow key: Use to navigate the menu; press the key to move the
cursor up one line.
• Down arrow key: Use to navigate the menu; press the key to move
the cursor down one line.
• Left arrow key: Use to navigate the menu; press the key to move
the cursor left one field.
• Right arrow key: Use to navigate the menu; press the key to move
the cursor right one field.
• Plus (+) key: Use to change (increase) the value of a field.
• Minus (-) key: Use to change (decrease) the value of a field.
• Lamp test key: Use to initiate the lamp test, which will light all the
front panel LEDs for 3 seconds.
• Menu key: Press this key any time to bring the MAIN menu on line.
• Help key: Press this key to display limited on-line help information.
• Enter key: Use this key to save a value that has been changed, to
display a selected submenu (lower level), or to execute a selected
action.
• Escape key: Use this key to abort a change, or to go back to the
immediate higher level menu.
Display Software
Ve rsi on
Note: It is critical that the software version of the BJHx Intelligent
Controller matches that of the BJB Basic Controller. Both main and
first sub version numbers must match. For instance, 6.5.1 and 6.5.2
is a permissible combination, but not 5.5 and 6.5.2.
You can check the software versions of both the Basic and Intelligent
controllers by pressing the Menu and then the Help keys on the front
panel. The version numbers will appear at the bottom of the display.
Display Language You can view the information on the display in one of three languages.
The default choice, called Symbol, uses short versions or acronyms of
English words. The second choice is English, which uses longer English

Tyco Galaxy SC Controller Specifications

General

Brand	Tyco
Model	Galaxy SC Controller
Category	Controller
Language	English