Tyco Galaxy SC Controller - Page 401

Tyco Electronics Galaxy SC Controller J85501F-1
Appendix D - 26 TL1 (Transaction Language 1) and X.25 Interface Issue 13 February 2001
response header
A^^atag^REPT^RMV^EQPT cr lf
^^^"AID" cr lf
...
^^^"AID" cr lf;
If the alarm state of the object is true, it will be reported as equipment
removed.
Report Restoration
The Galaxy automatically sends the following message to report the
restoration of equipment on datalogger channels configured as
Equipment Presence for TL1 reporting:
response header
A^^atag^REPT^RST^EQPT cr lf
^^^"AID" cr lf
...
^^^"AID" cr lf;
Bellcore
Reference
Documents
The following Bellcore documents give the details of the
communication architecture between network elements and the OS
centers:
• TR-TSY-000827 Operations Technology Generic Requirements
(OTGR): Generic Operations Interfaces - Non-OSI
Communications Architecture
• TR-TSY-000828 Operations Technology Generic Requirements
(OTGR): Generic Operations Interfaces - OSI Communications
Architecture
The message format and other details about TL1 are available in the
following Bellcore documents:
• TR-TSY-000831 Operations Technology Generic Requirements
(OTGR): Operations Application Messages - Language for
Operations Application Messages
• GR-833-CORE Operations Technology Generic Requirements
(OTGR): Network Maintenance: Network Element and Transport
Surveillance Messages
• TR-NWT-000835 Operations Technology Generic Requirements
(OTGR): Operations Application Messages - Network Element and
Network System Security Administration Messages