Unicum NERO TOUCH - Page 109

User manual for NERO TOUCH, NERO TOUCH INSTANT
page 109
Version 1.1 / December 2017
ТМ
To read the information open the vending machine door, insert the service key into the door trip, insert
theUSBashdriveintotheUSBconnector(seeg.13)wheninvendingmodeandconrmtherequest
on the SavecongurationletoUSB?
Toloaddrinksimages,videoles,shownwhenmakingdrinks,computerprograms,up-
datingtheprograminterface,it’snecessarytoconnecttheUSBashdrivetotheUSB
PCconnector(seeg.13.1)!Toworkwithauditandcongurationles(seesection13.0)
theUSBashdriveshouldbeconnectedtotheUSBMBconnector(seeg.13.1).
InformationthatcanbedownloadedfromtheUSB-ashdriveintothemachine:
CongurationofacertainMachine:TheEVA-DTSformatle.Filename:Сххххххх.DTS,with7-digit
vendingmachineserialnumber,speciedinthemenutechnicianGeneral-Machinenumbersetupsec-
tion.E.g.:С0000123.DTS.Thelewillbeloadedintothevendingmachineonlyifitmatchesthenumber
speciedintheVendingmachinenumbersettingandinthelename.Thiswillpermitloadingdifferent
congurationsfordifferentvendingmachinesfromthesameUSBashdrive.
 To downloadthe information you want toinsert USB-ash drive into theconnector ofthe controller
board in the trade regime and approve the request: LoadConguration?
Generalconguration: File format EVA-DTS. File name: CONF_GEN.DTS.
 To downloadthe information you want toinsert USB-ash drive into theconnector ofthe controller
board in the trade regime and approve the request: LoadGen.Cong.?
Software updating: To update the vending machine software go to the manufacturer’s website http://
www.unicum.ru/en/ into the SUPPORT section and choose the technical documentation for the required
vendingmachinemodel.ThenchoosetheMachineFirmware.Theautomaticdownloadingoflestothe
PCwillstart.Thelesaredownloadedasanarchivedfolder.TorecordthelestotheUSBashdrive,
decompressthefolderrstandthensavethefoldercontentsintherootdirectoryoftheUSBashdrive.
Inthearchivedfolder,therearethelesforsoftwareupdatewithexplanatorytextles.
ToupdatethevendingmachinesoftwareinserttheUSBashdrivewithsavedlestotheUSBconnector
(seeg.13).Whentheselesaredetectedbythecontroller,themessageaskingforsoftwareupdatingwill
appear. To download the power board must approve the request: Load Hot Firmware?
To download the software of the main board machine must approve the request:: MainBoard FIRMWARE?
Editingcongurationles,andviewauditlesbyusingaspecialprogram‘‘UnicumVendingMachine
Tools, which can be downloaded here: https://uonline.unicum.ru/ef/tools/uVMTools.msi