ТМ
9.1.10 Functional Tests
Fig.9.20 - Functional tests
BUTTON DESCRIPTION
Cool Boiler Automatic boiler cools due to pumping cold water through it to a tempera-
ture of 45 degrees.
Empty Boiler The machine empties the boiler, after the devastation of the boiler must be
switched off, unscrew the bottom hose and turn on the machine (following
the inclusion of machine translated it into service mode, where it will open
the valve by pouring water through the rest of the bottom of the boiler).
Fill Boiler Themachinellstheboiler.Iftheboilerdoesnothavetimetobelledduring
pump operation - 30 sec., The cycle repeats until discharge water into the
canister waste
Powder 1...4
Automatic pouring an ingredient (powder) of the corresponding container button
Mixer1...4
The motor of a mixer appropriating the button about on 0.2 sec.
Close Brewer
When entered it closes the espresso group in coffee making state
Open Brewer
When entered the espresso group is opened in initial state to grind coffee
Grinder Test
When entered it turns ON the coffee grinder for 0.5 seconds provided that
the dosing apparatus is not full
Doser Test
When entered it opens the dosing apparatus twice (if it contains ground
coffee, it is dropped into the nozzle)
Grind Coffee
When entered it passes ground coffee into the nozzle
Water in Soluble 1...4
Water supply to the mixer 1 .. 4
Water in Coffee
Supply of water to espresso group
To Next Page
Loading...
