ТМ
ATTENTION!
Very high cleaning temperature!
Plastic parts damage risk!
• When cleaning the vending machine plastic parts don’t exceed the temperature of 65
0
С.
• Make sure that the waste containers inside the vending machine are under the nozzles for drinks
during the execution of the washing program.
Note: Cleaning and maintenance operations should be logged.
ATTENTION! Never use abrasive agents for cleaning the vending machine!
11.2 Cleaning list
Component Operations Manual section Means
Espresso group Remove coffee residues 11.2.1.1 Brush
Milk system Start the cleaning program 11.2.1.2 Cleaning solution
Waste containers Emptying and cleaning 11.2.1.3 Washing agent, rag
Drop tray, tray grill Emptying and cleaning 11.2.1.4 Washing agent, rag
Cup tray Cleaning 11.2.1.5 Washing agent, rag
Case (from the outside) Cleaning --- Damp cloth
Milk container (for FRESH
MILK only)
Cleaning 11.2.1.6 Washing agent, rag
Daily
Component Operations Manual section Means
Milk ow meter (for FRESH
MILK only)
Disassembling and clean-
ing
11.2.2.1 Damp cloth
Check valve (for FRESH
MILK only)
Disassembling and clean-
ing (only as appropriate)
11.2.2.2 Cleaning solution
Containers for soluble ingre-
dients
Cleaning of all individual
parts
11.2.2.3 Washing agent, rag
Coffee container Cleaning 11.2.2.4 Washing agent, rag
Mixer assembly Disassembling and clean-
ing
11.2.2.5 Washing agent, rag
Cappuccinatore Disassembling and clean-
ing
11.2.1.6 Washing agent, soft bot-
tle-washing brush
Weekly
To Next Page
Loading...
