Unicum NERO TOUCH - Page 23

User manual for NERO TOUCH, NERO TOUCH INSTANT
page 23
Version 1.1 / December 2017
ТМ
5. Carry out the adjustment in accordance with the "Milkfoamadjustment" section (see above).
 6. Afterobtainingtherequiredresultsetthegearedsectorasshowning.4.16.
Fig.4.16
ATTENTION! Don't turn the knob after the adjustment. Set the geared sector with minimum off-
set (by matching it with the slits).
7. Assemble in the reverse order.