Unicum NERO TOUCH - Page 55

User manual for NERO TOUCH, NERO TOUCH INSTANT
page 55
Version 1.1 / December 2017
ТМ
NAME DESCRIPTION VALUE
Server #1 IP address Enter IP address for server to which the Machine
would connect.
Fortherstmanualconnectiontotheserver(via
SMS) this parameter is set automatically by the
server
Enter IP address
Server #1 port Enter port for server to which the Machine would
connect.
Fortherstmanualconnectiontotheserver(via
SMS) this parameter is set automatically by the
server
Enter port
Server #2 IP address Enter IP address of the server to which the Ma-
chine would connect in case of inability to connect
to server 1.
If the server does not have reserve line the sec-
ondaddressmustbethesameastherstone.
Whenmakingrstmanualconnectiontotheserv-
er this parameter is set automatically by the server
Enter IP address
Server #2 port Enter port of the server to which the Machine
would connect in case of inability to connect to
server 1.
If the server does not have reserve line the sec-
ondaddressmustbethesameastherstone.
Whenmakingrstmanualconnectiontotheserv-
er this parameter is set automatically by the server
Enter port
APN Sets the access point, which will be used to es-
tablish internet connection.
The value of this parameter can be known from
the mobile operator
Enter up to 40
characters
Login Sets login for connection to the mobile provider’s
access point.
You can ask for this parameter from your provider
Enter up to 20
characters
Password Sets the password to connect to the access point
of your mobile provider.
You can know the value for this parameter from
your operator
Enter up to 20
characters
IMEI Shows IMEI (id) of the connected modem. Ac-
cordingtoIMEIthemachinecanbeidentication
on the server
Version Shows the software version of the modem and
the type of the modem
Signalquality Quality of the received signal
GPRS Connected or not to GPRS
Note: Settings are relevant only when using a modem (option) in the machine.