38 Basic functions
Additional forwarding types
This description applies for the following forwarding types:
• Forwarding for intnl
• Forwarding for extnl
• Forwarding on busy
• Call forward. no reply
• Forwarding on busy/after timeout
Programming a forwarding destination activates call forwarding. If call forward-
ing is deactivated, the forwarding destination is deleted at the same time.
Configuring and activating call forwarding
N Open the Program/Service menu page 26.
Confirm the option shown.
Confirm the option shown.
Variable call forwarding is offered first.
Confirm until the required forwarding type page 35 is shown in the first line.
Example:
Forwarding type with status.
Select and confirm the option shown.
j Enter the call forwarding destination number.
Confirm, when the phone number is complete.
Deactivating variable call forwarding
For "Call forwarding for internal" and "Call forwarding for external":
r Press the lit key. The LED goes out.
For all other forwarding types:
c Open the idle menu page 21.
Select and confirm the option shown.
Call forwarding is deactivated and the destination number is deleted.
Displays
In idle mode ( page 20), the following signals remind you that call forwarding
is activated:
Fixed/variable call forwarding
r The key LED lights up.
The call forwarding icon and the phone number or, if necessary, the name of the
forwarding destination are shown.
Call forwarding can also be preconfigured in the system page 61.
To Next Page
Loading...
