Unify OpenScape 4000/HiPath 4000 - Activating;deactivating Do not disturb; Activating;deactivating Speaker call protect

Privacy/security 77
Activating/deactivating "Do not disturb"
If you do not wish to take calls, you can activate do not disturb. Internal callers
hear the ring tone and receive the message "Do not disturb".

External callers are redirected to the attendant console. The administrator can
set forwarding destinations for do not disturb so that internal and external calls
can be forwarded.
Prerequisite: The administrator have activated do not disturb for all
HiPath
4000 stations in your system.
N Open the Program/Service menu  page 26.
Select and confirm the option shown.
Select and confirm the option shown. The display shows whether do not disturb
is activated or deactivated
 page 20.
Confirm the option shown.
or
confirm.
Activating/deactivating "Speaker call
protect"
You can block speaker calls to your phone. If a caller attempts to contact you via
a speaker call, the connection is established as a normal call.
N Open the Program/Service menu  page 26.
Select and confirm the option shown.
Select and confirm the option shown.
The display shows whether "Speaker call protect" is activated or deactivated.
Confirm the option shown.
or
confirm.
If your phone belongs to an ONS group (parallel call  page 104), please
note the following:
Do not disturb can be activated/deactivated on any phone in the ONS
group - it then applies to all phones in that group.
Feature settings? g
Do not disturb?
Activate?
Deactivate?
An icon in the status bar  page 20 reminds you that "Do not disturb" is
activated.
The attendant can bypass "Do not disturb" and reach you.
If the administrator have blocked "Do not disturb" generally for
HiPath
4000, the menu option "Do not disturb?" does not appear in the
Program/Service menu.
Feature settings? g
Speaker call protect?
Activate?
Deactivate?