58 Enhanced phone functions
System-wide speaker call
You can place a speaker call from your phone to any internal party with a tele-
phone equipped with speakerphone mode or a loudspeaker.
Speaker call to a variable destination
Prerequisite: You have programmed the function "Speaker call-one-way" on a
key
page 67.
^ Lift the handset.
or
n Press the key and enter speakerphone mode.
j Enter the system code for "Speaker call-one-way" (contact the administrator if
necessary).
or
S Press the "Spkr. 1-way" programmed sensor key.
j Enter the internal number of the party.
A connection is immediately established to this destination station’s loudspeaker
if
• the station is not busy
• the handset has not been lifted
• "Speaker call protect" is not activated
Z The caller hears a confirmation tone when the connection is established and
they are free to start speaking.
^ The called party can accept the connection by lifting the handset.
n or S If the called party presses the speaker key or the line key (if configured), the con-
nection is lost.
Speaker call to a fixed destination
The system code for "Speaker call-one-way" and the destination number are
programmed on a repdial key
page 69.
S Press the programmed repdial key. A connection to the destination loudspeaker
is immediately established.
The same number of speaker calls and normal connections is possible.
To Next Page
Loading...
