Enhanced phone functions 57
Busy override – joining a call in progress
Prerequisite: An internal station is busy. It is important that you reach this col-
league.
Select, confirm and briefly wait.
Z Your colleague and their call partner hear a warning tone.
You can now start talking.
HiPath 4000 as an entrance telephone
system (two-way intercom)
You can place a speaker call to an internal party on HiPath 4000 using the loud-
speaker on their telephone to establish a connection. You can initiate a speaker
call from a consultation call. The following functions are available:
• System-wide speaker call
– to a variable destination
– to a fixed destination
• Speaker call in a group
– to a variable destination
– to a fixed destination
• Two-way intercom in a group
– to a variable destination
– to a fixed destination
• Announcement to all members of a line trunk group
You can cancel the speaker call or the announcement by replacing the handset
or, during a consultation call, by retrieving the call on hold.
To override a call, you must have received the correct authorization.
Call override is not possible if the called party has station override security
activated.
Please ensure for all functions that "Speaker call protect" is deactivated on
the relevant phones
page 77.
If a speaker call is placed to a party and "Speaker call protect" is activated
on their phone, the speaker call is ignored and a normal call is established.
To Next Page
Loading...
