Unify OpenScape 4000/HiPath 4000 - Accepting a call for another member of your team

Enhanced phone functions 43
Accepting a call for another member of your team
If a team member does not answer a call within 15 seconds (system-depen-
dant), the remaining team members hear an alert tone.
In idle mode
The phone is ringing. "Call for" is displayed on the phone.
^ T Lift the handset and press the flashing "Pickup" key. You have now picked up the
call.
or T Press the flashing "Pickup" key.
Speakerphone mode.
During calls
T Press the flashing "Pickup" key.
The first party is placed on hold while you are connected to the second party.
Ending the second call and returning to the first one
s Press the key shown.
Accepting a specific call
You hear another telephone ring and recognize the number, or a colleague re-
quests that you pick up calls for a specific phone.
^ Lift the handset.
Select and confirm the option shown.
j Enter the phone number of the phone from which you wish to pick up calls. In
this way you can accept the call.
Display called extension
If the number of the phone in a call pickup group, for which you wish to pick up
a call, is not displayed (the default display for call pickup groups is deactivated),
you can lift the handset and enter the code for "Display on request". Contact your
administrator for this code.
^ Lift the handset.
j Enter the system code for "Display on request" (contact the administrator if nec-
essary).
The phone number is displayed once you have entered the code.
Picking up a call in a hunt group
If configured, you can also be reached using a hunt group phone number.
Z Your telephone rings.
^ Lift the handset.
Direct call pickup?