Unify OpenScape 4000/HiPath 4000 - Additional Repdial Key Functions

Programming sensor keys 69
Defining a label
Confirm the option shown.
The phone number entered is displayed as the key label.
or
Select and confirm the option shown.
If the number entered is assigned a name in HiPath 4000, you can display this
as a key label.
or
Select and confirm the option shown.
You can enter any name. For more information, see  page 70.
Select and confirm the option shown. Your entry is saved.
Additional repdial key functions
Prerequisite: You have defined a phone number for a repdial key and are still
in the menu
 page 68.
Entering an automatic consultation call
Select and confirm the option shown. "RF" appears in the display.
j Add the destination number.
Entering a number with a pause (example)
Select and confirm the option shown. The display shows: "P".
j Enter additional numbers.
Repdial keys with enhanced functions
Some functions are not available via the menu - you must enter codes to access
them. These codes are configured in the HiPath
4000 system. You can obtain
these codes from your administrator.
Use Destination Number?
R 220870
Use Destination Name?
R Matthews
Create Personal Label?
Gerard Matthew
Save?
Enter Consult?
If you press this key during a call, a consultation call is immediately set up.
The first party is placed on hold, the number of the saved destination is di
-
aled.
Enter Pause?
A pause is three characters long.