54 Enhanced phone functions
Disconnecting a specific participant from the
conference
You are connected to a conference and wish to disconnect one of the partici-
pants.
Select and confirm the party you want.
Confirm the option shown.
Putting the conference on hold
On multi-line telephones, you can place the conference on hold and conduct an-
other call on a different line, for example.
R Press the line key.
or
Select and confirm the option shown.
The conference is placed on hold.
R Press the line key for the conference that is on hold – you are then reconnected
to the conference.
Entering commands using tone dialing
(DTMF suffix dialing)
After dialing a phone number you can set tone dialing. This allows you to use
command entries to control Dualtone Multi-Frequency (DTMF) devices, such as
answering machines or attendant systems.
N Open the Program/Service menu page 26.
Select and confirm the option shown.
Select and confirm the option shown.
You can now enter commands using the keys 0 - 9, the asterisk key, and the
pound key.
Ending the call also deactivates DTMF suffix dialing.
Depending on your system configuration, "DTMF suffix dialing?" may ap-
pear in the display once you have finished entering the number. You can
then enter commands immediately after dialing the phone number.
To Next Page
Loading...
