Enhanced phone functions 53
Accepting a second call and connecting it to the conference
If you receive a second call during the conference page 47, you can connect
this party to the conference.
Prerequisite: You are conducting a call in a conference and receive a second
call.
Z An alert tone is audible.
T Press the "Pickup" sensor key.
or Only if a "Pickup" sensor key is not configured:
Confirm the option shown.
[ You are immediately connected to the second caller. The conference partici-
pants are placed on hold.
Select and confirm to connect the second call to the conference.
Transferring a conference
Each party can transfer the conference to a third party whom they have called
via a consultation call or via the "Add to conference?" function. This party is not
a participant in the conference at this point. The conference cannot be trans
-
ferred to a second call.
Prerequisite: You are in a conference.
Confirm the option shown.
Select and confirm the option shown. The conference participants are placed on
hold.
j Call a party.
or
Confirm the option shown.
Confirm the option shown.
j Call a party and announce the transfer.
Select and confirm the option shown.
You have left the conference.
\ Replace the handset.
To Next Page
Loading...
