94 Making calls via multiple lines
Holding and re-accepting a call on a line key
Prerequisite: You have accepted a call on a line key ( page 84) or you are
conducting a consultation call.
S Briefly press the line key you are currently using,
or
Select and confirm the option shown.
The line key where the call is on hold flashes slowly. The call can be continued
on any phone in the team where the LED for this line key is flashing.
Retrieving the call
T Press the flashing line key. Proceed with your call.
Exclusively holding and re-accepting a call
on a line key
Prerequisite: You have accepted a call on a line key or you are conducting a
consultation call that only you can or wish to continue.
S Press the "Excl. Hold" programmed sensor key.
or
Select and confirm the option shown.
The line key where the call is parked, flashes slowly. The call can be continued
on your phone only and is not signaled on any other phone.
Retrieving the call
T Press the flashing line key. Proceed with your call.
Accepting a specific held line
A colleague in an open-plan office has parked a call on a line key and requests
that you accept the call. You do not have access to this line.
^ Lift the handset.
Select and confirm the option shown.
j Enter the phone number of the phone where the call is parked. In this way you
can accept the call.
To Next Page
Loading...
