Enhanced phone functions 55
System-wide parking
On HiPath 4000 systems, you can park up to ten internal and/or external calls
and retrieve them on another phone.
There are two options for parking a call:
• Automatic park
• Manual park
You cannot park calls if:
• All park positions are busy
• The park position you wish to use is busy
• The station is an attendant console
• The call is a consultation call
• The call is in a conference
Automatically parking a call
You can automatically park a call in a free park position from your phone, and
retrieve it on your phone or another phone.
Call park
S Press the "System Park" programmed sensor key. The first free park slot is used
and indicated on the display. The call is now parked.
\ Replace the handset.
Retrieving a parked call
S Press the "System Park" programmed sensor key.
0 ... 9 Enter the park slot number of the parked call and proceed with the call.
You can also put the call on hold first by confirming "Consultation?" and
then parking the call.
To Next Page
Loading...
