Unify OpenScape 4000/HiPath 4000 - Manually parking a call; Call waiting (camp-on)

56 Enhanced phone functions
Manually parking a call
You can manually park a call in a free park position from your phone, and retrieve
it on your phone or another phone.
Call park
Select and confirm the option shown.
j Enter the destination number.
The call is now parked.
\ Replace the handset.
If "Park" is not available, you will receive acoustic and also visual notification.
Confirm and continue the call.
or
\ Replace the handset.
You will receive a recall for the call on hold.
Retrieving a parked call
^ Lift the handset.
or
n Press the key and enter speakerphone mode.
If you cannot reach a destination ...
Call waiting (camp-on)
Prerequisite: An internal station is busy. You would still like to reach your col-
league.
Select, confirm and briefly wait.
Z Your colleague hears a warning tone during the call. The programmed sensor
key "Pickup" flashes on the phone. If their phone has a display, your name and
phone number is displayed.
Park to station?
Return to held call?
Camp-on?
To camp on, you must have received the correct authorization.
Camp on is not possible if the called party has do-not-disturb activated.