Unify OpenScape 4000/HiPath 4000 - Using the Shift Key

Enhanced phone functions 49
Using the shift key
The sensor key "Split"  page 17 (must be configured by the administrator) can
be used for the following functions:
• Consultation (return to waiting call or waiting conference)
• Toggle/Connect
• Acceptance of a second call
• Acceptance of a group call
Second call
Z You hear a call waiting tone. Information for the call is displayed.
T Press the flashing sensor key "Split". You pick up the waiting call. The LED lights
up.
Toggle/Connect
[ You are connected with two parties. One party is on hold. The sensor key "Split"
lights up.
R Press the sensor key "Split" to switch to the other party. The first party is placed
on hold.
Consultation
[ j You call the second party. The second party does not answer.
S Press the sensor key "Split" to return to the waiting party or conference.
Group call
[ You are connected with a party. A group call is waiting. Information for the group
call is displayed.
T Press the flashing sensor key "Split". You pick up the group call, the first party is
placed on hold. The LED lights up.