60 Enhanced phone functions
Two-way intercom to a variable destination
When using the two-way intercom in a group, the loudspeaker and the micro-
phone of the destination phone are automatically switched on.
^ Lift the handset.
or
n Press the key and enter speakerphone mode.
j Enter the system code for "Speaker call-two-way" (contact the administrator if
necessary).
or
S Press the "COM Spk 2way" programmed sensor key.
j Enter the speed dial number for the corresponding group member.
The loudspeaker and microphone of the destination phone are automatically
switched on.
Two-way intercom to a fixed destination
The system code for "Speaker call-two-way" and the speed dial number for the
corresponding group member are programmed on the repdial key
page 69.
S Press the programmed sensor key.
The loudspeaker and microphone of the destination phone are automatically
switched on.
To Next Page
Loading...
