4. Using transmitter with Insight PC
software
4.1 Vaisala Insight PC software
Vaisala Insight PC software is a configuration software for Vaisala Indigo-compatible probes
and transmitters. Insight is available for the Windows operating system (64-bit only). For a full
list of supported operating system versions, see http://www.vaisala.com/insight.
To ensure support for your transmitter, download the latest version of Insight at
www.vaisala.com/insight.
With the Insight PC software, you can:
• See real-time measurements and device and status information
• Configure the transmitter settings (for example, display mode)
• Configure analog outputs of the transmitter
• Calibrate and adjust the probe connected to the transmitter
• Test and adjust the analog output channels of the transmitter
To connect the Indigo transmitter to the Vaisala Insight PC software, you must
have the Vaisala USB Device driver installed on your PC.
More information
‣
Configuring analog outputs with Insight PC software (page 40)
‣
Calibration and adjustment with Insight PC software (page 47)
4.2
Connecting to Insight PC software
• 4-mm Allen key, provided
• Computer with a Microsoft Windowsâ operating system (64-bit version) and
Vaisala Insight PC software installed
• Vaisala Indigo USB adapter (Vaisala item code USB2) and M12 - M8 service
cable (Vaisala item code 262195)
• Vaisala USB Device driver installed
Use only cables provided by Vaisala to connect devices to the
transmitter. Attempting to connect incompatible devices or cables can damage
the equipment.
CAUTION!
Indigo300 User Guide M212849EN-A
30
To Next Page
Loading...
