2. Product overview
2.1 Introduction to Indigo300 transmitter
Figure 1 Indigo300 connections overview
Vaisala Indigo300 Transmitter is a host device for displaying measurement values from Vaisala
Indigo-compatible probes and/or transmitting them to automation systems through analog
signals.
Probes can be connected to the transmitter tool-free using the locking wheel. You can connect
a probe to the locking wheel directly or by using a cable. Instead of the locking wheel, it is also
possible to use a cable gland with a fixed cable.
The service port on the front can be opened with a 4-mm Allen key for enabling access to the
free Vaisala Insight PC software or Indigo80 handheld indicator.
With Insight and Indigo80, you can configure both the transmitter and the probe connected to
it, as well as calibrate and adjust the probe without having to detach it from the transmitter.
2.1.1 Indigo300 basic features and options
• All Vaisala Indigo-compatible probes can be connected to all Indigo transmitter models
• Numerical and graphical color display for up to 3 parameters
• Support for one Indigo-compatible probe
• Power supply input 15 ... 30 V DC (24 V AC ±10 % 50/60Hz)
• 3 pre-configured analog outputs (mA or V)
• Service port on the front for connecting to Vaisala Insight PC software or Indigo80
handheld indicator
• 1-m, 3-m, 5-m, and 10-m probe connection cables available as accessories
Chapter 2 – Product overview
9
To Next Page
Loading...
