USER’S MANUAL__________________________________________________________________
98 __________________________________________________________________ M211322EN-D
contributions. Bits <6:5> permit the IF-Input and Burst-Input signals to be
reassigned on the downlink.
CMD=4 Data<4:0> Built-in noise generator level
IF-Input and Burst-Input selection
Data<6:5> 00 : Normal 01 : Swap IF/Burst
10 : Burst Always 11 : IF Always
Data<7> 0 : Normal 1: Swap Pri/Sec IF
Data<8> Downlink IF data stream format
0 : Normal 72 MHz single channel
1 : Half-band 36 MHz dual channel
Data<9> 0 : Low Half-band 1: High Half-band
To Next Page
Loading...