Vaisala RVP900

Chapter 7 __________________________________________________ Host Computer Commands
VAISALA______________________________________________________________________ 337
0916-187
7.33 Set Burst Pulse Processing Options
(BPOPTS)
Some burst pulse processing options can be set by this command.
0916-188
PLY/N These bits affect whether the RVP900 will phase lock its
(I,Q) data to the measured burst pulse. The "PLY" and
"PLN" bits force "Yes" and "No" responses. If both bits are
clear or both bits are set, then no change will be made.
ACY/N These bits affect whether the RVP900 applies pulse-to-
pulse amplitude correction to its (I,Q) data. The Yes/No
bits behave the same as PLY/PLN.
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
| | | | | | | | | | | | | | | | |
| Target Power in Tenths of dB Relative to Saturation (signed) | Input 4
|_______________________________________________________________|
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
| | | | | | | | | | | | | | | | |
| Target Power Delta over Range Span in Tenths of dB (signed) | Input 5
|_______________________________________________________________|
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
| | | | | | | | | | | | | | | | |
| Target Doppler Shift in Hertz (signed) | Input 6
|_______________________________________________________________|
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
| | | | | | | | | | | | | | | | |
| Target Doppler Delta over Range Span in Hertz (signed) | Input 7
|_______________________________________________________________|
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
| | | | | | | | | | | | | | | | |
| Four Spare Words | Inputs 8–11
|_______________________________________________________________|
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
| | | | | | | | | | | | | | | | |
| | 0 0 0 1 1 1 0 1 1 1 1 1 | Command
|_______________|_______________________________________________|
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
| | | | | | | | | | | | | | | | |
| |ACY|ACN|PLY|PLN| Input 1
|_______________________________________________|___|___|___|___|