Vaisala RVP900

USER’S MANUAL__________________________________________________________________
482 _________________________________________________________________ M211322EN-D
- General Purpose IO
- GPIO Differential signal 0 will be configured as the Pre-trigger
- GPIO Differential signals 1 to 9 and TTL signals 0 to 10 will be
configured as header information inputs
- I/Q data is output over Ethernet using UDP with command and status
functions set using TCP/IP.
- I / Q data is sent over Ethernet processed and past to the Time
Series Interface. Header information is used as a tag to
synchronize the RVP900 I/Q data with the ASR9 data stream.
- AC Power option
- 24V Fan
G.5.2 RVP902 Processor
The RVP902 Processor is Vaisala's standard product offering with a Xeon
X8DTU motherboard running CentOS 6.4. The RVP900 Radar utilities are
equivalent to similar utilities in the RVP7 / RxNet7 platform. The
computers key features are.
- Dual Xeon E5620 Intel 2.4GHz Quad-Core Processor with 1333 MHz
front side bus
- 2U 19 Rack Mounted Chassis
- 16 GB Memory
- Dual 500 GB 7.2 RPM SATA Hard Disk
- 4x External 2.0 USB: 2 in the front, 2 in the back
- PS/2 keyboard and mouse
- 2 serial interfaces (1 front, 1 back)
- 2 Ethernet (10/100/1000)
- 700 W Redundant Power Supplies
- VGA Port
- 4x PCI Expansion Slots: 1x PCIe 2.0 x 8 and 3x PCI-X
- DVD-RW
- 0,1,5,10 Software RAID
- RoHs
- 10 to 35°C Operating Temperature