USER’S MANUAL__________________________________________________________________
368 _________________________________________________________________ M211322EN-D
C.6 Setup "Mc" Command (Board
Configuration)
Test Goal
Verify that the TTY setups for the Board Configuration section are
properly configured for the customer application.
Special Test Equipment
- KVM connected
Reference
- See Section 4.2.1 Mc — Top Level Configuration on page 104
Test Procedure
1. Enter the TTY setups and type the "Mc" command.
2. Set all the values, as required, for your operation.
Test Passed
Parameters set.
For Customer_________________________________ Date__________
For Vaisala___________________________________ Date__________
To Next Page
Loading...