Appendix C _____________________________________________ Installation and Test Procedures
VAISALA______________________________________________________________________ 369
C.7 Setup "Mp" Command (Processing Options)
Test Goal
Verify that the TTY setups for the Processing Options section are properly
configured for the customer application.
Special Test Equipment
- KVM connected
Reference
-See Section 4.2.2 Mp — Processing Options on page 106
Test Procedure
1. Enter the TTY setups and type the "Mp" command.
2. Set all the values, as required, for your operation.
Test Passed
Parameters set.
For Customer_________________________________ Date__________
For Vaisala___________________________________ Date__________
To Next Page
Loading...