Appendix C _____________________________________________ Installation and Test Procedures
VAISALA______________________________________________________________________ 379
C.14 Ascope Test
Test Goal
Verify that the display Ascope Utility functions properly.
Background
The Ascope Utility provides a completely independent radar control and
plotting capability. This is used extensively for testing the radar and
RVP900.
Special Test Equipment
- KVM connected
Reference
- See the TTY Nonvolatile Setups chapter in the IRIS Utilities Manual.
Test Procedure
1. As operator, type the "ascope" command and verify that the ascope
utility displays correctly and starts to update.
2. Configure a "DEFAULT" startup and save it.
3. Exit and restart ascope.
4. Verify that the default startup is properly restored.
Test Passed
For Customer_________________________________ Date__________
For Vaisala___________________________________ Date__________
To Next Page
Loading...