Vaisala RVP900

USER’S MANUAL__________________________________________________________________
12 __________________________________________________________________ M211322EN-D
- Chapter 7, Host Computer Commands: This chapter describes the
digital commands that the host computer must use to set up and
control the processor. The introductory section discusses processor
I/O in general, and gives an overview of how to set up for recording
data. Each command is then detailed in subsequent sections.
- Appendix A, Serial Status Formats: This appendix serial status
formats.
- Appendix B, RVP900 Packaging: This appendix the general features
of the packaging and the electrical specifications and cabling of these
units.
- Appendix C, Installation and Test Procedures: This appendix provides
installation and test procedures are designed to assist Vaisala field
engineers and customers with the installation and testing of the
RVP900 on a radar system.
- Appendix D, RVP900 Developer's Notes: This appendix describes the
software environment that is provided to third-party developer’s who
wish to customize the RVP900 (and RVP8) algorithms to meet their
particular needs.
- Appendix E, Time Series Recording: This appendix describes the
time series (TS) recording features.
- Appendix G, Acronyms: This appendix provides a list of acronyms.
- Appendix H, References and Credits: This appendix provides
references and citations of work.