Vaisala RVP900

USER’S MANUAL__________________________________________________________________
276 _________________________________________________________________ M211322EN-D
0916-103
The following input words are optional, only if Action=1.
0916-104
The is the same number as GPARM output 6. See the discussion in
Sections Section 7.7 Initiate Processing (PROC) on page 275 and Section
7.9 Get Processor Parameters (GPARM) on page 290.
0916-105
This is the same number as the GPARM output 49.
0916-106
This is the same number as the GPARM output 50.
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
| | | | | | | | | | | | | | | | |
| Starting Range in km (Max 992km) of 32km Sampling Interval | Input 1
|_______________________________________________________________|
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
| | | | | | | | | | | | | | | | |
| Internal Trigger Rate (6Mhz/N) to use During Noise Sampling | Input 2
|_______________________________________________________________|
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
| | | | | | | | | | | | | | | | |
| 0 0 | (MSB) Log of Measured Noise Level (LSB) | Input 3
|_______|_______________________________________________________|
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
| | | | | | | | | | | | | | | | |
| Noise Level Standard Deviation (in 1/100 of a dB) | Input 4
|_______________________________________________________________|
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
| | | | | | | | | | | | | | | | |
| Ratio of Horizontal/Vertical Noise Power in Hundredths of dB | Input 5
|_______________________________________________________________|
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
| | | | | | | | | | | | | | | | |
| <Spare> |Err|Ttf|Ntg| Input 6
|___________________________________________________|___|___|___|