Installation & Configuration Manual
14.2 Programming tools
Keypad
The keypad provides quick onsite access to system menus and programming. The
authorised installation engineer must set initial default configurations using the
keypad. Programming of proximity card/device reader and assignment to users
also must be done using the keypad.
SPC Pro
SPC Pro is a software application enabling you to configure SPC systems either
online or offline. The SPC Pro programming tool provides additional advanced
communication and X10 functionality not found on the keypad. Firmware upgrades
can also be performed using SPC Pro.
SPC Pro supports USB, Serial, Ethernet and PSTN/GSM modem connectivity to an
SPC controller.
14.2.1 Fast Programmer
The SPC Fast Programmer is a portable storage device that provides the engineer
with the ability to upload and download configuration files in a quick and convenient
manner. Fast Programmer can be used in conjunction with all of the above
programming tools. For more details, see page [➙ 311].
Fast Programmer may perform firmware upgrades.
14.3 Configuring start-up settings
The following start-up settings can be changed at a later time when programming
the system functionality.
If powering up the panel the version number of the SPC system will be displayed
on the keypad.
Prerequisite:
To initialize the start-up configuration press the reset button on the PCB for at
least 6 seconds.
1. Press a key on the keypad.
- Press NEXT after each setting to move to the next setting.
2. Choose the LANGUAGE in which the configuration wizard will be displayed.
3. Choose the appropriate REGION.
- EUROPE, SWEDEN SWITZERLAND, BELGIUM SPAIN UK IRELAND
ITALY, , , , CANADA, USA
4. Choose a TYPE of installation:
- DOMESTIC: is appropriate for home use (houses and apartments).
- COMMERCIAL: provides additional zone types and commercial zone
default descriptions for the first 8 zones.
- FINANCIAL: is specific for banks and other financial institutions and
includes features such as auto-setting, time locks, interlock groups and a
seismic zone type.
To Next Page
Loading...
Need help?
General
