Installation & Configuration Manual
SPC4320.320
SPCP332.300
3.1.2 Compliance with EN50131 Approvals
Software Requirements
It is not possible to change the Region or Grade in SPC Pro. It is only possible to
change these settings in the browser or keypad.
In the Standards settings page, select Europe under Region to implement
EN50131 requirements.
Select Grade 2 or Grade 3 to implement the grade of EN50131 compliance.
The Wireless settings Prevent Setting Time and Device Lost Time must be set
to a value other than 0.
Select Synchronization Time with Mains under Clock settings to use mains as
clock master.
To Next Page
Loading...
Need help?
General
