Vanderbilt SPC6350 User Manual

17
Engineer programming via the browser
Configuring Communications
276
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
ATS Name
Enter the name of the ATS. If you do not
enter a value, the ATS name defaults to
ATS 1, ATS 2 etc.
SPT Account Code
The number that uniquely identifies the
panel to the RCT. Enter 0 if you do not have
the SPT Account Code. In this case, you
can commission the panel using the ATS
Registration ID. For an EN50136 ATS, the
ATS Registration ID is automatically
generated when you click Save. The RCT
can send the SPT Account Code to the
panel when it is available.
RCT Identification & Backup RCT Identification (Dual Path Dual Server Only)
RCT ID
Enter the RCT ID that uniquely identifies the
RCT (e.g. SPC Com XT) to the panel. This
must match the value entered in the SPC
Com XT Server Configuration Manager tool
in the Server RCT ID field in the Server
Details tab. See the SPC Com XT
Installation & Configuration Manual .
RCT URL or IP Address
Enter the RCT URL or IP Address for the
RCT server location (e.g. SPC Com XT
server).
RCT TCP Port
Enter the TCP port for the RCT (e.g. SPC
Com XT). This must be the same value
entered for the field Server FlexC Port in the
SPC Com XT Server Configuration Manager
tool.
ATP Interface
EN50136 ATS Category
Select the EN50136 ATS Category (SP1-
SP6, DP1-DP4). For a description of
categories, see ATS Category Timings
[➙ 362].
Primary Interface
Select the Primary Interface to apply to the
primary communications path from the
following:
 Ethernet
 GPRS: Modem 1
 GPRS: Modem 2
 Dial Up Internet: Modem 1
 Dial Up Internet: Modem 2
Backup Interface
For a Dual Path ATS, select the Backup
Interface to use for the backup
communications path from the following:
 Ethernet
 GPRS: Modem 1
 GPRS: Modem 2
 Dial Up Internet: Modem 1
 Dial Up Internet: Modem 2
17.10.2.3 Configuring an EN50136-1 ATS or Custom ATS
An ATS comprises an alarm panel, network paths and an RCT (e.g. SPC Com XT).
It combines one or multiple paths between an SPC panel and an RCT. You can
add up to 10 ATPs to an ATS.

Vanderbilt SPC6350 Specifications

General

Brand	Vanderbilt
Model	SPC6350
Category	Power Supply
Language	English