Vanderbilt SPC6350 User Manual

Security
2
General safety instructions
13
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
2.2.3 Setup
Radio interference with other devices in the environment / EMS
 When handling modules that are susceptible to electrostatic discharge, please
observe the ESD guidelines.
Damage due to unsuitable mounting location
 The environmental conditions recommended by the manufacturer must be
observed.
See Technical Data.
 Do not operate the device close to sources of powerful electromagnetic
radiation.
Danger of electrical shock due to incorrect connection
 Connect the device only to power sources with the specified voltage. Voltage
supply requirements can be found on the rating label of the device.
 Ensure that the device is permanently connected to the electricity supply; a
readily accessible disconnect device must be provided.
 Ensure that the circuit that the device is connected to is protected with a 16 A
(max.) fuse. Do not connect any devices from other systems to this fuse.
 This device is designed to work with TN power systems. Do not connect the
device to any other power systems.
 Electrical grounding must meet the customary local safety standards and
regulations.
 Primary supply cables and secondary cables should be routed such that they
do not run in parallel or cross over or touch one anther inside the housing.
 Telephone cables should be fed into the unit separately from other cables.
Risk of cable damage due to stress
 Ensure that all outgoing cables and wires are sufficiently strain-relieved.
2.2.4 Operation
Dangerous situation due to false alarm
 Make sure to notify all relevant parties and authorities providing assistance
before testing the system.
 To avoid panic, always inform all those present before testing any alarm
devices.
2.2.5 Service and maintenance
Danger of electrical shock during maintenance
 Maintenance work must only be carried out by trained specialists.
 Always disconnect the power cable and other cables from the main power
supply before performing maintenance.
Danger of electrical shock while cleaning the device
 Do not use liquid cleaners or sprays that contain alcohol, spirit or ammonia.

Vanderbilt SPC6350 Specifications

General

Brand	Vanderbilt
Model	SPC6350
Category	Power Supply
Language	English