Vanderbilt SPC6350 User Manual

Engineer programming via the browser
17
Panel status
179
Vanderbilt
Installation & Configuration Manual
A6V10276959
01.05.2016
17.6.6 FlexC Status
This screen displays the status of each ATS configured on your system.
1. To view the status of an ATS, go to Status - FlexC.
2. The table below describes the status criteria available for each ATS.
ATS Registration ID
The unique registration ID of the ATS allows
the panel to be uniquely identified at the
RCT.
ATS Status
The status of the ATS, for example,
initializing.
Time since last poll
The time since the last poll on any ATP in
the ATS.
Event Queue Count
Number of events in the event queue waiting
to be transmitted.
Event Queue Count
No. of events in the event queue waiting to
be transmitted.
Event Queue
List of the events currently in the Event
Queue. The tables shows the following:
 Event Seq No.
 Event Timestamp
 Event Description
 Additional Event Info
 Start Timestamp
 Report Duration
Event Log
Event log history for all the events that have
occurred on the ATS. The table shows the
same fields as Event Queue above and the
following additional field:
 Event Seq No.
 Event Timestamp
 Event Description
 Additional Event Info
 Result
 Reported ATP
 Start Timestamp
 ACK/Fail Timestamp
 Report Duration
Network Log
Network log for the ATS showing the
configured polling interval.

Vanderbilt SPC6350 Specifications

General

Brand	Vanderbilt
Model	SPC6350
Category	Power Supply
Language	English