Engineer programming via the browser
Installation & Configuration Manual
Cameras must not be shared with other CCTV applications.
Cameras can only be configured with the web browser or SPC Pro. Configuration
with the keypad is not supported. SPC Pro provides an easier method of
configuration and is recommended.
The panel supports two camera resolutions:
320X240
This setting is recommended if you want to view images on the browser)
640X480 (with some restrictions).
The following cameras are supported in addition to other generic cameras:
Vanderbilt CCIC1410 (1/4” VGA IP Colour Camera)
Vanderbilt CFMC1315 (1/3” 1.3 MP Indoor Dome Colour Camera)
A command string is available as a default to access configuration details for the
above cameras directly. Other generic IP cameras require a command string to be
entered manually.
Adding Camera
1. Select Configuration > Advanced > Verification > Video.
A list of any previously configured cameras is displayed and their online or
offline status. A camera is online if an image was obtained from the camera
in the previous 10 seconds.
2. Click on the Add button to add a new camera or the Edit button to edit an
existing camera.
The following screen is displayed.
To Next Page
Loading...
Need help?
General
