Page 121 of 244
3.4. Homogeneity evaluation
3.4.1. Homogeneity standards
Parameter LSL (Lower Specification Limit) USL (Upper Specification Limit)
Homogeneity 10.00 150.00
3.4.2. Phantom Specification
QUART: DVT Phantom
3.4.3. Test Method
1. The evaluation is conducted in the same manner as in the evaluation method in Section 1.3.
3.4.4. Test Result
Parameter LSL Measurement value USL Pass/Fail
Homogeneity 10.00 150.00
To Next Page
Loading...
